RS3000Portable repeater
Portable split-frequency DMR / analog repeater, 25 W, 36 h standby
The full parameter table below is taken from the official datasheet. The PDF version — with dimension drawings and the complete standard-compliance table — is released on request, so we can send the exact revision your project needs.
RS3000 DMR Repeater — Different Frequency Repeating Mode (EN, 1 page)
Overview
A portable split-frequency repeating DMR/analog repeater built on new-generation RF technology with high sensitivity and strong noise suppression. Combined with the vocoder digital error correction, clear voice is forwarded even in harsh noisy environments. Large-area aluminium alloy heat dissipation supports continuous 25 W transmission; accelerated life testing targets reliable 24/7 communication.
- New-generation RF technology: high sensitivity, high noise suppression, digital error correction
- Supports both analog and DMR — upgrade path from analog without replacing hardware
- Modular design: control unit, transmit unit and receiver are independent
- Touch screen showing time-slot status, analog/digital mode, battery level, charge status and alarms
- Large-area aluminium alloy heat dissipation for continuous 25 W transmission
- Accelerated life testing for reliable 24/7 operation
- Built-in 25000 mAh battery with 36 h standby and > 6 h continuous transmission
Parameter tables
Values are transcribed from the RS3000 official datasheet. Where a range is given it is the datasheet's own range, not a rounded figure.
General
- Frequency range
- VHF 136–174 MHz · UHF1 350–400 MHz · UHF2 400–470 MHz
- Channel capacity
- 640 (32 per group)
- Channel spacing
- 12.5 kHz / 25 kHz
- RF output power
- 5 – 25 W
- Dimensions (L×W×H)
- 409 × 231 × 117 mm
- Weight
- 7 kg
- Battery capacity
- 25000 mAh
- Standby time
- 36 h
- Continuous working time
- > 6 h
- Working temperature
- −40 °C to +55 °C
- Input voltage
- AC 220 V · DC 13.6 V ± 15%
- Standby / receive / emission current
- < 800 mA / < 1900 mA / < 6 A
- Frequency stability
- ±0.5 ppm
- RF impedance / connector
- 50 Ω · N-female
- Display
- Touch screen: time-slot status, analog/digital mode, battery, charging, alarm
- ESD grade
- IEC 61000-4-2 (level 4)
- Maximum workload
- 100%
Receiver
- Frequency stability
- ±1.5 ppm
- Analog sensitivity
- 0.3 μV (12 dB SINAD) · 0.22 μV typ. (12 dB SINAD) · 0.4 μV (20 dB SINAD)
- Digital sensitivity
- 0.28 μV (3% BER @ 12.5 kHz) · 0.3 μV (3% BER @ 6.25 kHz)
- Neighbour selectivity
- 70 dB @ 12.5 kHz · 75 dB @ 25 kHz
- Inter-modulation
- ETSI 70 dB · TIA603 75 dB
- Block
- TIA603 90 dB · ETSI 84 dB (see specification note)
- Rated audio distortion
- ≤ 5% @ 2.0 W / 8 Ω
- Acoustic frequency response
- 300 Hz – 3 kHz, +1/−3 dB
- Conducted radiation
- −57 dBm
Transmitter
- RF output power
- 5 – 25 W
- Channel spacing
- 12.5 kHz / 25 kHz
- Spurious emission
- −36 dBm @ ≤ 1 GHz · −30 dBm @ > 1 GHz
- FM modulate
- 16K0F3E @ 25 kHz · 11K0F3E @ 12.5 kHz
- 4FSK modulation
- data 7K60FXD · voice and data 7K60FXW @ 12.5 kHz
- Audio distortion
- ≤ 3%
- Acoustic frequency response
- 300 Hz – 3 kHz, +1/−3 dB
- Modulation frequency bias
- ±2.5 kHz @ 12.5 kHz · ±4.0 kHz @ 20 kHz · ±5.0 kHz @ 25 kHz
- FSK error
- < 1.5%
- Neighbour power
- 60 dB @ 12.5 kHz · 70 dB @ 25 kHz
Indicators are based on ETSI standard testing. Availability varies depending on the laws and regulations of each country. Unless otherwise specified, all displayed specifications are typical and subject to change without prior notice.
- Output power: 5–25 W per both the English and Chinese datasheets. An earlier website entry listed 50 W in error; it has been corrected to 25 W across all pages and the AI fact files. If you hold a quotation issued against the 50 W figure, contact us and we will re-confirm the configuration.
- Blocking: the English datasheet states TIA603 90 dB / ETSI 84 dB; the Chinese data sheet states 95 dB. To be confirmed.
Where our documents disagree with each other, we show both readings and confirm the value for your variant before you order. Tell us the model and band you need.
RoHS 2.0 compliant. A dedicated SRRC model approval for the portable variants is quoted on request — tell us the exact variant before relying on it.
See the certification registerRS3000 datasheet and configuration quote
Two ways to proceed, depending on how far you are in your selection.
Download the datasheet
Leave a contact and the RS3000 PDF starts downloading straight away (EN / CN editions available). The link stays valid for 30 minutes. This is a technical datasheet — it does not commit you to anything.
Request a configuration proposal
Tell us the band, the scenario and the quantity. A sales engineer replies with the matching datasheet revision, the certificate numbers for that variant, RF link budget guidance and a priced configuration.
- Datasheet PDF with dimension drawings
- Certificate numbers covering your variant
- RF link budget guidance for your scenario
- Compatible accessory and antenna options
Specification tables last reviewed 2026-10-15.